Urgent News: Gas and Oil Going Away

The Urgent Change to Mass Save® in 2024 if you use Gas or Oil

A significant change to the Mass Save® program in 2024. The program is discontinuing all incentives on gas and oil equipment. This means homeowners who wish to replace a gas or oil furnace or a gas boiler and receive Mass Save’s 0% loan and rebates must do so before the deadlines. After April 30, 2024, only electric heat pump systems will qualify for the Mass Save program’s benefits.

Understanding the Mass Save Program is a collaboration of Massachusetts’ largest utility companies, including National Grid and Eversource, aimed at helping homeowners make their homes more energy-efficient. Through the Mass Save® program, homeowners can access:

• A 0% loan for up to seven years
• Rebates of up to $10,000 on a new HVAC system
• Assistance throughout the process from start to finish

Who is Eligible for the Mass Save Program?

Not all homeowners in Massachusetts are eligible for the Mass Save program. Eligibility is typically determined by whether you have a National Grid or Eversource account for either gas or electric.

If you do, you are likely to be eligible. However, customers with municipal electric accounts might only qualify if they also have a National Grid gas line.

Can a Gas or Oil Fueled Heating System be Installed in 2024?

Yes, a gas—or oil-fueled heating system can be installed in 2024, but only for a little while longer. The deadline for fulfilling all the financing requirements is April 30, 2024.

Only after this date will electric heat pump systems qualify for financing and rebates from the Mass Save program. This is an important consideration for homeowners who prefer to stay on natural gas or oil.

The Process of Availing the Mass Save Program Benefits

Availing the benefits of the Mass Save program is a straightforward process. Homeowners can visit the website or call the Mass Save program representatives to set up a consultation (this is a third party that will come out and perform an Energy Audit. The advisor will also provide information on rebate and financing eligibility through the Mass Save program.

Again, if you are even thinking about it, this needs to be implemented today. April 30th is a month away, and the process needs to begin before then.

Conclusion

The Mass Save program substantially benefits homeowners looking to upgrade their home’s heating and cooling systems.

However, with changes coming into effect in 2024, homeowners must act quickly to take advantage of these incentives. The process is simple, with Mass Save representatives ready to assist every step of the way.

Homeowners in Massachusetts are encouraged to reach out and get started on this process as soon as possible.

,Please call us with any questions you may have

Further Resources

For further reading, please check out these additional resources:

• ,,Home Energy Assessment
• ,,2024 Resident Rebates
• ,,Boiler and Furnaces

source https://www.gandcplumbing.com/post/urgent-news-gas-and-oil-going-away

Signs Your Boiler is Leaking Carbon Monoxide Gas: A Vital Guide

Imagine this scenario: you’re cozied up in your Massachusetts home, relying on your trusty boiler to keep you warm during the chilly months. But lurking behind the scenes could be a silent threat – carbon monoxide gas leaks. In this comprehensive guide, we’ll explore the signs that your boiler might be leaking carbon monoxide, and why prioritizing regular boiler maintenance, with the guidance of G&C Plumbing & Heating, is a must for your family’s safety.

Understanding Carbon Monoxide: The Silent Danger

Carbon monoxide (CO) is an odorless, colorless gas produced by fuel-burning appliances like boilers. When these appliances don’t burn fuel efficiently, carbon monoxide can accumulate, leading to potentially life-threatening situations. Identifying the signs of a carbon monoxide leak is paramount to ensuring the safety of your household.

Signs Your Boiler Might Be Leaking Carbon Monoxide

Unexplained Illness: If multiple family members experience unexplained symptoms like headaches, nausea, dizziness, or confusion, it could be a sign of carbon monoxide exposure.

Yellow Flames: A healthy gas flame should burn blue. If you notice a yellow or orange flame in your boiler, it might indicate incomplete combustion and a potential CO leak.

Soot or Stains: Black soot or streaks around your boiler could signify poor combustion and the production of carbon monoxide.

Condensation: Excessive condensation on windows, walls, or cold surfaces in your home might indicate a CO leak, as improper combustion generates moisture.

The Importance of Regular Boiler Maintenance

Now that you’re aware of the signs of a carbon monoxide leak, let’s delve into why regular boiler maintenance is your best defense against this danger.

1. Ensuring Proper Combustion
2. Detecting and Repairing Issues
3. Cleaning and Ventilation Checks
4. Extending Lifespan

https://youtu.be/as_eWtCnwFc?si=sAuqWSHvabxadPAo

Why Trust G&C Plumbing & Heating for Your Boiler Maintenance?

Your family’s safety is paramount, and that’s where G&C Plumbing & Heating excels. With their expertise and commitment to excellence, they offer a range of benefits that set them apart:

• Experienced Technicians: G&C’s technicians possess the skills and knowledge to inspect, maintain, and repair boilers efficiently.
• Thorough Inspections: G&C’s professionals conduct comprehensive inspections to catch even the slightest issues that could lead to CO leaks.
• Preventive Solutions: Through proactive maintenance, G&C helps you avoid potential hazards, ensuring your home’s safety.

Carbon monoxide leaks from boilers are a serious concern that demand immediate attention. By recognizing the signs of a potential leak and prioritizing regular boiler maintenance, you can safeguard your home and your loved ones from this silent danger. G&C Plumbing & Heating’s expertise ensures that your boiler operates efficiently, minimizing the risk of carbon monoxide exposure.

Remember, it’s not just about staying warm; it’s about staying safe.

FAQs About Carbon Monoxide Leaks from Boilers

In conclusion, being vigilant about carbon monoxide leaks from boilers is a responsibility that shouldn’t be taken lightly. With the guidance of experts like G&C Plumbing & Heating and a commitment to regular maintenance, you can ensure that your Massachusetts home remains a safe haven for your family.

source https://www.gandcplumbing.com/post/signs-your-boiler-is-leaking-carbon-monoxide-gas-a-vital-guide

Is it Necessary to Filter Tap Water? Exploring Whole Home Water Purification

Imagine turning on your tap, expecting clean and refreshing water, only to be greeted by an odd taste or a faint odor. The quality of tap water can be a concern for many homeowners, especially when considering the health of their families and the longevity of their plumbing systems.

In this comprehensive guide, we’ll delve into the topic of tap water filtration and why whole home water purification, a specialty of G&C Plumbing & Heating, might just be the solution you need.

Understanding Tap Water Quality: What’s in Your Water?

Before we jump into the necessity of tap water filtration, let’s take a quick look at what might be lurking in your tap water. While water treatment plants work to provide safe drinking water, certain contaminants can still find their way into your home’s plumbing system.

Common contaminants include:

• Chlorine: Used for disinfection, chlorine can leave an undesirable taste and odor in your water.
• Sediments: Small particles like sand, rust, and dirt can make their way into your water, affecting its clarity and taste.
• Hard Minerals: Calcium and magnesium are responsible for hard water, which can lead to scale buildup in pipes and appliances.
• Chemicals: Pesticides, herbicides, and other chemicals from agricultural runoff can end up in your water supply.

Benefits of Whole Home Water Purification

Now that you’re aware of potential contaminants, let’s explore the reasons why whole home water purification systems, offered by experts like G&C Plumbing & Heating, might be a worthwhile investment.

https://youtu.be/0THHxGtBZJk?si=MnHDJfRRLJKOlYt8

1. Comprehensive Filtration
2. Protecting Plumbing Systems
3. Improved Taste and Odor
4. Health Benefits

Choosing the Right Whole Home Water Purification System

Selecting the ideal water purification system for your Massachusetts home involves considering a few key factors:

https://youtu.be/0THHxGtBZJk?si=DTpXlLYsCJ0T-5HS

• Water Quality: Conduct a water quality test to identify the specific contaminants present in your water. This will help you determine the type of filtration required.
• Flow Rate: Ensure that the system you choose can handle the water flow rate of your household. You wouldn’t want water pressure issues!
• Maintenance: While whole home systems require less maintenance than point-of-use options, some maintenance is still necessary. Choose a system that suits your maintenance preferences.

Why Trust G&C Plumbing & Heating for Your Water Purification Needs?

When it comes to ensuring the water quality in your Massachusetts home, expertise matters. G&C Plumbing & Heating boasts a team of seasoned professionals who understand the intricacies of water purification systems.

The question of whether to filter tap water boils down to your family’s health, the longevity of your plumbing system, and your overall comfort. Whole home water purification systems offer a comprehensive solution that addresses these concerns, ensuring that every drop of water flowing through your home is of the highest quality. With the guidance of professionals like G&C Plumbing & Heating, you can make an informed decision that benefits your home and your loved ones.

FAQs About Tap Water Filtration

In conclusion, considering the necessity of tap water filtration is a step towards ensuring the health and well-being of your family. With whole home water purification systems, you can enjoy clean and safe water from every faucet, while also protecting your plumbing infrastructure. The guidance of experts like G&C Plumbing & Heating will help you make an informed decision that aligns with the unique needs of your Massachusetts home.

source https://www.gandcplumbing.com/post/is-it-necessary-to-filter-tap-water-exploring-whole-home-water-purification

Why is My Water Heater Leaking from the Drain Valve?

Picture this: you’re going about your day in your cozy Massachusetts home, enjoying a hot shower or washing dishes when suddenly, you notice a puddle forming around your water heater. Panic sets in – is your house flooding? Don’t worry, you’re not alone in facing this conundrum. Leaks from a water heater’s drain valve are more common than you might think. In this comprehensive guide, we’ll dive into the reasons behind this issue and provide you with expert advice to address it. And who better to turn to than the reliable experts at G&C Plumbing & Heating?

Understanding the Drain Valve: A Culprit in Disguise

The drain valve of your water heater is a small yet crucial component. Located near the base of the tank, it serves the purpose of periodically flushing out sediment and minerals that accumulate at the bottom. Over time, this sediment can lead to reduced efficiency and potential damage to the tank.

However, when the drain valve itself starts leaking, it’s time to take action.

Common Causes of Drain Valve Leaks

• Loose or Faulty Valve: One of the most straightforward reasons for a leak is a loose or defective valve. This can happen due to wear and tear over the years, causing water to escape from the valve connection.
• Sediment Buildup: Ironically, the very sediment that the valve is meant to flush out can also contribute to leaks. Excessive sediment accumulation can cause the valve to become clogged or corroded, resulting in leakage.
• Excessive Pressure: High water pressure is another potential cause of leaks. If the pressure inside the tank becomes too much for the valve to handle, it might start leaking to release the excess pressure.

Addressing the Issue: Tips and Solutions

If you find yourself facing a leaky drain valve, don’t fret. There are several steps you can take to address the issue before it turns into a major headache.

1. Tightening the Valve
2. Flushing the Tank
3. Replacement

Why Choose G&C Plumbing & Heating?

When it comes to plumbing and heating issues, expertise and reliability matter the most. That’s where G&C Plumbing & Heating shines. With years of experience serving Massachusetts homeowners, they have earned a reputation for their exceptional service, prompt response, and knowledgeable technicians.

https://youtu.be/taSLdvdeRok?si=aVIZqlLYs6560Tov

A leaking water heater drain valve might cause panic, but armed with knowledge and the right professionals, you can tackle the issue effectively. Remember, maintenance is key to preventing such leaks in the future. Regular flushing and maintenance, along with the assistance of experts like G&C Plumbing & Heating, will keep your water heater functioning efficiently for years to come.

FAQs About Water Heater Drain Valve Leaks

In conclusion, a leaking water heater drain valve might seem like a daunting issue, but with a clear understanding of the causes and solutions, you can navigate the situation effectively. Remember that enlisting the help of professionals like G&C Plumbing & Heating can save you time, effort, and ensure a lasting fix. Regular maintenance and timely action will keep your water heater in top-notch condition, providing you with reliable hot water for your Massachusetts home.

source https://www.gandcplumbing.com/post/why-is-my-water-heater-leaking-from-the-drain-valve

Should I get my gas boiler serviced every year?

As a homeowner, it’s always a great feeling when you save some money on equipment repair. However, putting off your gas boiler servicing is not the solution.

In fact, you end up spending more money on gas boiler repair or replacement. Below are reasons why experts at G&C Plumbing & Heating recommend getting your gas boiler serviced every year.

Why Get Your Gas Boiler Serviced Every Year?

Don’t wait till your boiler breaks down to seek gas boiler repair services. There are many benefits to having your boiler serviced yearly.

1. Better safe than sorry
   A yearly boiler service can help ensure your appliance runs smoothly. A technician will inspect all parts, including the ventilation, to determine if everything is in good condition. The servicing will also include an inspection for wear and tear, which, if present, could be a potential safety hazard.
2. Save some money
   Besides addressing safety concerns through yearly gas boiler servicing, you’ll also save money in the long run. Finding and repairing any issues before they worsen helps avoid more damage that would warrant more expensive repairs or even a complete replacement. In addition, addressing issues early on can keep your gas boiler working efficiently for long, thus helping cut back on electricity bills.
3. Keep your warranty valid
   Some boiler manufacturers require that you seek boiler services yearly, failure to which your warranty becomes invalid. When life happens and your boiler breaks down, you could be stuck with a hefty gas boiler repair bill, so don’t neglect your boiler.
4. Peace of Mind
   Getting your gas boiler serviced is an excellent way of ensuring you always rest easy at night. You enjoy peace of mind when you know your appliance is running smoothly and safely. As a bonus, you can focus on other investments, having taken care of your gas boiler repair.

For high-quality gas boiler repair services, ensure you contact a reputable plumbing and heating company; G&C Plumbing & Heating expert technicians are trained and certified to service all models of gas boilers.

Here is what goes into a simple cleaning:

https://youtu.be/RuCmJuXCZNo

DIY Boiler Maintenance Tips

Besides annual boiler cleanings, you can employ a few tips to keep everything running smoothly.

• Check your boiler regularly to ensure the pressure is within the recommended range.
• Declutter the area around the gas boiler to rid dust and debris, which can spoil the boiler’s components.
• Check to ensure your boiler’s pilot always burns blue.
• If your radiators feel cold at the bottom, remove trapped air by bleeding the radiators.

Having learned all about gas boiler repair and the importance of yearly servicing, you can now go ahead and schedule your gas boiler service.

When to Schedule Your Boiler Service

The best time to schedule your boiler service is in the fall, before the brutally cold winter sets in. Experts at G&C Plumbing & Heating recommend this time because it’s when you need it the most.

However, if you haven’t had your gas boiler repaired or boiler serviced in a while, you can start now. Contact G&C Plumbing & Heating today to find out more about yearly boiler servicing.

source https://www.gandcplumbing.com/post/should-i-get-my-gas-boiler-serviced-every-year

Failing flushes? Common Causes for Low Power in Toilet

There’s nothing quite like the feeling of walking into the bathroom and realizing your toilet isn’t what it used to be.

Maybe it’s suddenly louder or takes longer to fill, or has “jiggle the handle” syndrome.

Or, worst of all, its flushes are flunking and nothing is dumpin’.

It’s an unpleasant and disconcerting experience, and it’s also one that can (thankfully!) be avoided if you understand the causes of a toilet failing to flush with power.

We’ll look at the most common causes of lack of power in the throne room and tips on restoring a royal flush.

Pressure Problems

Be easy on your toilet; it’s under pressure.

No, really, that’s one of the most common causes of a toilet not flushing with power—insufficient water pressure.

If the water pressure is too low, it may not be strong enough to push enough water through the toilet fast enough for a forceful, effective flush.

It makes you waste water and time as you stand there waiting for the tank to refill.

All Clogged Up

Even the word “clog” sounds like something stuck in a pipe. It’s another common cause of a toilet not flushing with power and can be caused by a few different things.

If the clog is blocking the flow of water from leaving the toilet, it can cause the panic you might feel when you realize the water level is rising instead of falling. If you are experiencing a gurgling sound then you have an issue with your drain pipe which should be looked at, without a thought, by your local plumber.

Clogs between the tank and the bowl can turn a torrent into a trickle, and they can happen in places you might not even know exist.

Ever wonder how the water inside the bowl gets there?

A collection of hard-working nozzles tucked under the rim of the toilet bowl called siphon jets. If those get clogged, they’ll spit and sputter when they should be spouting, causing your flush to be flimsy.

Clogs can be caused by various things, including foreign objects flushed down the toilet, calcium buildup, or even tree roots that have invaded the pipes.

https://youtu.be/LzFIPUJghsQ

Toilet Trouble? Call For Back-up!

If your toilet isn’t flushing with power, consider a toilet repair, this will save you time by not having to plunge and money on your water bill. G&C Plumbing & Heating is a trusted plumbing provider in the Bellingham / Franklin, MA areas, that specializes in repairing and installing all brands and styles of toilets.

Find out more about how one of the licensed, professional plumbers at G&C Plumbing & Heating can help homeowners in Franklin or surrounding Norfolk County restore any toilet to its former glory by contacting us today—we’re here to help!

source https://www.gandcplumbing.com/post/failing-flushes-common-causes-for-low-power-in-toilets

Why Are Gas Pipes Threaded Differently Than Water Pipes

Piping systems play an important role in plumbing and heating systems, as they are responsible for transporting gas and water to various locations in a building. While water pipes and gas pipes serve similar purposes, they are designed differently to ensure the safe and efficient transport of each substance.

One noticeable difference between the two is the direction of their threads. In this article, we will explore why gas pipes are threaded in the opposite way to water pipes and the significance of this difference.

Materials Used in Gas and Water Heater Pipe

Gas pipes are usually made of black steel, while water pipes are commonly made of copper or PVC. The use of black steel in gas pipes is due to its durability and resistance to corrosion, which helps to ensure the longevity of the piping system.

However, it is important to note that not all gas pipes are black; some gas pipes can be made of materials like aluminum or plastic, although they are not commonly used in the industry.

Why Are Gas Pipes Threaded in the Opposite Way?

The main reason for the difference in threading direction between gas pipes and water pipes is to prevent cross-threading, which occurs when two threads are twisted in the wrong direction.

Cross-threading can cause leaks and other problems, so it is important to prevent it in gas piping systems, which are more dangerous than water piping systems. If gas pipes were threaded in the same direction as water pipes, it would be much easier to cross-thread them during installation, which could result in dangerous situations.

Another reason for the difference in threading direction is to make it easier for plumbers to distinguish between the two types of pipes. This can be especially important in situations where a gas leak has occurred, and it is essential to quickly identify the source of the leak. If you are not a professional we advise you leave the house and call someone in.

Use of Black Gas Line Pipe

https://youtu.be/_Hz-BAFh3rI

While black pipes are commonly used in gas lines, it is not recommended to use them for a gas pipe installation. Black pipes are not specifically manufactured for gas piping, and they do not have the same level of durability and resistance to corrosion as pipes designed for gas transport.

Furthermore, black pipes can only be connected using threaded fittings, which are more prone to leaks and other problems compared to other types of fittings.

Flexible Pipes in Gas Lines

Flexible pipes can also be used in gas lines, but it is important to make sure that they are designed and certified for gas piping. Flexible pipes are not as durable as other types of gas piping, and they are more prone to leaks and other problems. Therefore, it is crucial to choose the right type of flexible pipe for a gas line installation.

In conclusion, gas pipes are threaded in the opposite direction to water pipes to prevent cross-threading and to make it easier for plumbers to distinguish between the two types of pipes. While black pipes and flexible pipes can be used in gas lines, it is important to ensure that they are designed and certified for gas piping.

When it comes to gas piping, it is best to choose a reputable plumbing and heating company like G&C Plumbing and Heating, to ensure that the installation is performed correctly and safely.

source https://www.gandcplumbing.com/post/why-are-gas-pipes-threaded-differently-than-water-pipes

Drain Cleaning Offer

Read about our drain cleaning unclogged drain services

Terms of coupon use:

• mention DRAIN15 or “15% off drain cleaning ad”
• cannot be combined with any other offers
• currently no expiration date
• mention the promotion at the time of service
• free video inspection of your drains with drain cleaning service, not any other plumbing service call
• any drain in your home
• 1x use per house address

Placement of promotion:

• social
• internet websites
• G&C website
• email

Campaign visuals:

source https://www.gandcplumbing.com/post/drain-cleaning-offer

Is Boiler Repair Near Me Serviced by HVAC or Plumber Tech?

If you’re among the growing number of homeowners who’ve chosen to fulfill the heating needs of their household with a boiler rather than a traditional furnace, you probably already appreciate that boilers make less noise, are more durable, provide a more even distribution of heat, and result in lower utility costs than other forms of heating systems.

Boilers are also less likely to break down than regular furnaces.

However, when they do require repair or maintenance, you’ll probably need to call a plumbing service rather than an HVAC technician. This makes sense because boiler are essentially household water appliances. Here’s what you need to know about boiler repair in Massachusetts.

How Are Boiler Leaks Repaired?

Fixing boiler leaks depends on the size and the location of the leak. Although it may be tempting to ignore a very small leak, this is a poor strategy because small leaks nearly always evolve into larger ones that you will eventually be no longer able to turn a blind eye to. In some cases, you may be able to purchase an additive from your local home improvement retailer that will form a seal, but this may prove to only be a temporary solution.

Once a boiler springs and leak and water starts flowing, it’s only a matter of time before water damage becomes part of the picture. This can lead to a variety of issues, such as structural damage and mold infestations, that will be costly and time-consuming to repair. For this reason, it’s preferable to be proactive about boiler services and repair any leaks while they’re still in the emerging stages.

Common causes of leaks in boilers include the following:

• Corrosion
• Faulty pressure valves
• Joints that have become loose or damaged over time
• Damaged pump seals

Your boiler services technician will perform a thorough inspection of your boiler and recommend an appropriate course of action. Keep in mind that multiple leaks may be a sign that it’s time to have an old boiler replaced with a newer model.

When Should a Homeowner Consider a Combi Boiler?

If it’s been determined that your current boiler is nearing the end of its natural life, you should consider having a combi boiler installed. A combi, or combination boiler, is a modern efficient form of boiler that keeps the water hot continuously, taking up less space and using less energy because it doesn’t require a cold water cistern. As an added benefit, if you decide to purchase and install a new combi boiler, you may be eligible for money-saving rebates at the local, state, and federal level.

Is There Only One Style of Boiler for Residential Homes?

There are two main boiler types used in residential properties. Steam boilers create steam, which is then sent throughout the home via radiators, while hot water boilers pump hot water through baseboards or radiators. Within these two types, there are also Standard Efficiency and High Efficiency boilers.

High-efficiency boilers utilize state-of-the-art technology to trap any escaping heat and redirecting it back into the home, therefore reducing waste and saving money. Most boilers manufactured in the past 10 years are feature high efficiency construction. Keep in mind that even though the initial installation costs of high-efficiency boilers, you’ll save money in fuel costs over the long run.

How Much Does a New Boiler Cost?

The cost of a new boiler is going to depend on several factors, such as type, whether it’s a High Efficiency or Standard Efficiency, the size of your home, and the type of fuel the boiler uses. Typical costs range between $5,000 and $12,000. Your local boiler services company can provide you with more information of the costs of boilers in your area and what type would be best for the size of your home and local climate conditions.

Call us today for more information on boiler services in Massachusetts. Whether you need help with a small leak or are seeking information on replacing your old boiler with a new model, our technicians are ready to provide you with skilled, prompt assistance no matter what type of boiler issue you have.

source https://www.gandcplumbing.com/post/is-boiler-repair-near-me-serviced-by-hvac-or-plumber-tech

Toilet Hose Leaking – This is What Professionals Plumbers Do

Ever entered your bathroom only to find a pool of water around the toilet or heard the sound of running water when the toilet isn’t in use? This can be a sign of a leaking toilet hose, which far too many homeowners and renters experience at different points in their lives.

Unfortunately, a leaking toilet can cause floor damage, increase water bills, and even pose a health hazard if not dealt with quickly and properly. This makes it crucial to address leakages, even minor seepages before they become a bigger problem.

Telltale Signs That Your Toilet Is Leaking

We’ve already mentioned finding a puddle of water on the floor around the toilet and hearing the sound of running water even when the toilet isn’t in use as some of the main signs of a leaking toilet. However, they are not the only signs to look out for. Here are four other signs that indicate that your toilet is leaking:

• The toilet has become loose from the floor and it feels unstable when you sit on it
• There’s water seeping from the base of the toilet
• Your toilet tank is taking longer than usual or failing to fill completely
• The flush is not working well or has completely stopped working

https://youtu.be/r6eRjIqB45w

Culprits Behind Toilet Leaks

There are several possible culprits behind toilet leaks. Some of the most common include:

Misaligned Flush Valve Assembly

Inside the toilet tank are several pieces that work together to make the flushing motion possible. One of those components is the flush valve assembly, which includes a ballcock and an overflow tube. If this assembly is not properly aligned with the drain, water will dribble out of the overflow tube into the bowl or onto the floor.

Worn-Out Toilet Flapper

The flapper is a rubber seal in your toilet’s tank that works like a valve. When the flapper is triggered, the water stored in the tank flows out into the bowl, allowing you to flush. If there are any small cracks or other signs of wear on the flapper, it won’t close properly after each flush and this will lead to small leaks over time.

Loose or Worn-Out Seals

Over time, seals around the toilet tank and base can wear down due to the continual shrinking and expansion of the rubber material. As this occurs, the fit between the tank, base, and water line connections becomes loose. This can cause water to seep into areas where it should not be and create a leak.

A Damaged Float

Basically, the float determines how much water your toilet’s tank holds. It’s usually placed inside the tank and will float when water fills it. If the float becomes damaged, loose, or stuck in any way, the toilet will be unable to keep track of how full it should be and may continue to fill until it starts to leak.

Damaged Toilet Bowl or Tank

Cracks, even small ones, can cause significant damage in a toilet bowl or tank. The porcelain and ceramic materials used are quite thin and can start to chip away at the slightest sustained pressure, such as constant use and weight of the water inside. When this happens even slight amounts of water leakage can occur on the floors and walls around the toilet.

As you can see, a leaking toilet is nothing to be trifled with. If you notice any of the signs highlighted above, it’s important that it be taken care of quickly or else the damages can worsen and lead to extensive and expensive toilet repairs.

As always; the professional plumbers at G&C Plumbing & Heating are here to help. We have the knowledge and expertise to quickly identify the underlying cause of your plumbing woes and determine the best solution to get your home secure, safe, and fully operational again.

Contact us today for all your plumbing, heating, and drainage needs!

source https://www.gandcplumbing.com/post/toilet-hose-leaking-this-is-what-professionals-plumbers-do